Drogon 2.4.6 Quadcopter Frame

140g

This is my Drogon v2.4.6 frame. As you can see below, I built a real one but I haven't flown it because I've already designed v2.4.9 with some important changes that should make it both stronger and lighter.

This frame is somewhat oudated. Please see the Drogon 2.4.9 frame.

photo of assembled Drogon v2.4.6 frame

Click this image for the full plan:
some photo

Parts

Sort by: type, name | weight | created | modified

(4) Interior B1,B2,B3,B4

Interior B1,B2,B3,B4

32mm x 16mm

1/8" birch plywood

4.2g

(1) Glue

User-defined Material

I'm estimating the amount of glue based on the actual weight and the weight calculated by the app.

5.0g

(3) Interior W1,W2,W3

Interior W1,W2,W3

73mm x 16mm

1/8" birch plywood

7.2g

(2) Diagonal Brace D1,D2

Diagonal Brace D1,D2

115mm x 16mm

1/8" birch plywood

7.6g

(2) Exterior E1,E2

Exterior E1,E2

116mm x 16mm

1/8" birch plywood

7.7g

(4) Exterior L1,L2,L3,L4

Exterior L1,L2,L3,L4

65mm x 16mm

1/8" birch plywood

8.6g

(2) Exterior S1,S2

Exterior S1,S2

180mm x 16mm

1/8" birch plywood

11.9g

(1) Exterior, Bottom Plate

Exterior, Bottom Plate

80mm x 160mm

1/16" birch plywood

This only covers the middle section. In v2.4.7 it will cover the entire bottom of the frame.

14.3g

(4) Diagonal Brace X1,X2,X3,X4

Diagonal Brace X1,X2,X3,X4

120mm x 16mm

1/8" birch plywood

15.8g

(2) Exterior, Top Plates

Exterior, Top Plates

Irregular Shape

1/16" birch plywood

21.0g

(4) Motor Arms

Motor Arms

27cm long

15.10mm OD Carbon Fiber tubing

36.6g


Total: 139.88g